Description Tungsten Carbide Nozzle - H2/ P2/ X2 - 0.4mm
The 0.4 mm Tungsten Carbide Nozzle is designed for those who frequently print with abrasive filaments. Think of fiber-reinforced materials such as CF and GF. Tungsten carbide is much harder than hardened steel. This nozzle has an HRA of 90 (hardened steel is around 74). As a result, it wears less quickly and requires less maintenance. According to Bambu Lab, this results in up to a 50% longer lifespan for abrasive, high-performance filaments.
The 0.4 mm variant is the most commonly used size. You get a good balance between detail and speed. This makes it suitable for everyday printing, but also for technical prints where you need a durable nozzle. The nozzle is part of the quick-swap design. You can quickly remove and replace the hotend using the lock. Always allow the hotend to cool down first and do not touch the heat block.
Important compatibility points: for the H2 dual-nozzle function, Bambu Lab currently only supports nozzles of the same size on the left and right. The nozzle is compatible with both hotends on the H2D. On the H2C, this hotend is only supported on the left (liftable) hotend.
Tungsten Carbide Nozzle - H2/ P2/ X2 - 0.4mm
SKU: BAMB3093
- Order before 4:00 PM = shipped today
- Free shipping from €99.95
- 14 days free returns
- Same-day pickup at our office in Leusden
Description Tungsten Carbide Nozzle - H2/ P2/ X2 - 0.4mm
The 0.4 mm Tungsten Carbide Nozzle is designed for those who frequently print with abrasive filaments. Think of fiber-reinforced materials such as CF and GF. Tungsten carbide is much harder than hardened steel. This nozzle has an HRA of 90 (hardened steel is around 74). As a result, it wears less quickly and requires less maintenance. According to Bambu Lab, this results in up to a 50% longer lifespan for abrasive, high-performance filaments.
The 0.4 mm variant is the most commonly used size. You get a good balance between detail and speed. This makes it suitable for everyday printing, but also for technical prints where you need a durable nozzle. The nozzle is part of the quick-swap design. You can quickly remove and replace the hotend using the lock. Always allow the hotend to cool down first and do not touch the heat block.
Important compatibility points: for the H2 dual-nozzle function, Bambu Lab currently only supports nozzles of the same size on the left and right. The nozzle is compatible with both hotends on the H2D. On the H2C, this hotend is only supported on the left (liftable) hotend.
