Description Bambu Lab PTFE Tubes - H2D
These original Bambu Lab PTFE Tubes are intended for replacing worn filament tubes in the Bambu Lab H2D. The set contains a gray tube of 590 mm and a white tube of 610 mm.
The PTFE tubes guide the filament through the printer. The smooth material limits resistance during filament feeding and retraction. The tubes have an inner diameter of 2.5 mm and an outer diameter of 4 mm.
PTFE tubes are consumable parts. The filament rubs against the inside during printing. As a result, the tubes can wear out over time. A worn or damaged tube can cause problems with the filament feed.
Therefore, check the tubes during the maintenance of your H2D. Replace them in case of obvious wear, deformation, or damage.
Package contents
- 1 × grey PTFE tube of 590 mm
- 1 × white PTFE tube of 610 mm
Bambu Lab PTFE Tubes - H2D
SKU: BAMB3115
- Order before 4:00 PM = shipped today
- Free shipping from €99.95
- 14 days free returns
- Same-day pickup at our office in Leusden
Description Bambu Lab PTFE Tubes - H2D
These original Bambu Lab PTFE Tubes are intended for replacing worn filament tubes in the Bambu Lab H2D. The set contains a gray tube of 590 mm and a white tube of 610 mm.
The PTFE tubes guide the filament through the printer. The smooth material limits resistance during filament feeding and retraction. The tubes have an inner diameter of 2.5 mm and an outer diameter of 4 mm.
PTFE tubes are consumable parts. The filament rubs against the inside during printing. As a result, the tubes can wear out over time. A worn or damaged tube can cause problems with the filament feed.
Therefore, check the tubes during the maintenance of your H2D. Replace them in case of obvious wear, deformation, or damage.
Package contents
- 1 × grey PTFE tube of 590 mm
- 1 × white PTFE tube of 610 mm
