Description BIQU Panda CryoGrip Pro Frostbite
The BIQU Panda CryoGrip Pro Frostbite is a double-sided build plate for various Bambu Lab 3D printers. This version has a print size of 256 × 256 mm. It is suitable for the Bambu Lab X2D, X1, P1, P2, and A1 series.
The Frostbite coating was developed for PLA and PETG. The surface offers excellent grip at low bed temperatures. This helps reduce warping and corner peeling during printing. Under normal use, no glue is needed.
This Frostbite version has a coarse texture. The surface applies a matte and tactile pattern to the underside of your print. Please take this into account if one side of the model remains visible.
The plate consists of seven layers. The core is made of magnetic spring steel with a hardness of 580 HV. On both sides there are various adhesive layers, protective coatings, and a CryoGrip top layer.
After printing, remove the plate from the print bed. By gently bending the flexible plate, the model will detach. According to BIQU's official material chart, the Frostbite version is suitable for PLA and PETG. For technical filaments and a finer surface texture, it is better to choose the Glacier version.
BIQU Panda CryoGrip Pro Frostbite Build Plate - 256 × 256 mm - Bambu Lab X2D/X1/P1/P2/A1
SKU: BIQU1004
- Order before 4:00 PM = shipped today
- Free shipping from €99.95
- 14 days free returns
- Same-day pickup at our office in Leusden
Description BIQU Panda CryoGrip Pro Frostbite
The BIQU Panda CryoGrip Pro Frostbite is a double-sided build plate for various Bambu Lab 3D printers. This version has a print size of 256 × 256 mm. It is suitable for the Bambu Lab X2D, X1, P1, P2, and A1 series.
The Frostbite coating was developed for PLA and PETG. The surface offers excellent grip at low bed temperatures. This helps reduce warping and corner peeling during printing. Under normal use, no glue is needed.
This Frostbite version has a coarse texture. The surface applies a matte and tactile pattern to the underside of your print. Please take this into account if one side of the model remains visible.
The plate consists of seven layers. The core is made of magnetic spring steel with a hardness of 580 HV. On both sides there are various adhesive layers, protective coatings, and a CryoGrip top layer.
After printing, remove the plate from the print bed. By gently bending the flexible plate, the model will detach. According to BIQU's official material chart, the Frostbite version is suitable for PLA and PETG. For technical filaments and a finer surface texture, it is better to choose the Glacier version.
