Description 5V 1.8A Isolated Output PoE Module - For Raspberry Pi 3B+ & 4
This is the Power Over Ethernet (PoE) module from Adafruit. You can use it to power your project via an ethernet cable. All you need is this PoE module and access to the middle taps of your Ethernet-capable board . Attach the four input wires and get regulated 5V 1.8A on the other side!
This version of the PoE module has a transformer in the middle. This is there so that there is no direct electrical connection between the 5V power/ground and the Ethernet cables .
The module works well with the Raspberry Pi 3B+ and Pi 4, these boards have the 4 pin header for the PoE. As you can see from the picture you only need a pair of F/F Jumper Wires to get the ethernet wires to the module, you then have two wires to bring the 5v back to the header. Please note that while a 2.5A supply is recommended for a Pi 3B+ / 4B this is only required when using with accessories . 1.8A will cover a wide range of uses as the current Draw is around 0.7a max without any extras.
5V 1.8A Isolated Output PoE Module - For Raspberry Pi 3B+ & 4
SKU: ADA2012
€ 19,62Incl. € 3,13 VAT
In stock2 items in stock
- Order before 4:00 PM = shipped today
- Free shipping from €99.95
- 14 days free returns
- Same-day pickup at our office in Leusden
Description 5V 1.8A Isolated Output PoE Module - For Raspberry Pi 3B+ & 4
This is the Power Over Ethernet (PoE) module from Adafruit. You can use it to power your project via an ethernet cable. All you need is this PoE module and access to the middle taps of your Ethernet-capable board . Attach the four input wires and get regulated 5V 1.8A on the other side!
This version of the PoE module has a transformer in the middle. This is there so that there is no direct electrical connection between the 5V power/ground and the Ethernet cables .
The module works well with the Raspberry Pi 3B+ and Pi 4, these boards have the 4 pin header for the PoE. As you can see from the picture you only need a pair of F/F Jumper Wires to get the ethernet wires to the module, you then have two wires to bring the 5v back to the header. Please note that while a 2.5A supply is recommended for a Pi 3B+ / 4B this is only required when using with accessories . 1.8A will cover a wide range of uses as the current Draw is around 0.7a max without any extras.
