Bambu Lab H2C Induction Hotend High Flow – 0.6mm – Hardened Steel

Description Bambu Lab H2C Induction Hotend High Flow – 0.6mm – Hardened Steel

The Bambu Lab H2C Induction Hotend High Flow is a complete hotend for the H2C and H2C Laser. It heats up using induction. As a result, the nozzle reaches temperature quickly and you experience less waiting time. This High Flow version is designed for extra high throughput. This is useful if you print at high speed and do not want your extrusion to be a limiting factor.

This version features a 0.6 mm hardened steel nozzle and is designed as a High Flow. This provides a strong combination: faster printing than with the 0.4 mm, but still with clean lines. According to Bambu , the maximum volumetric speed with the 0.6 mm High Flow nozzle is around 40 mm³/s (tested with Bambu PLA Basic). Hardened steel is also suitable for abrasive filaments. Think of CF- and GF-filled materials such as PA6-GF, PA6-CF, PET-CF, and PPS-CF. Furthermore, with the 0.6 mm, there is less risk of clogging with filled filaments.

The hotend uses a contactless power and signal interface. Therefore, there are no contact pins that can oxidize. It also features protection against overheating, overvoltage, and short circuits. Two sensors measure the temperature of the nozzle and the heatsink. If the heatsink becomes too hot, the system automatically increases the cooling. This helps prevent heat creep and reduces the risk of clogging during long prints.