This KlikAanKlikUit AWMD-250 Mini built-in dimmer multi is installed behind an existing single wall switch. This allows you to dim dimmable lighting wirelessly with the existing switch and one or more KlikAanKlikUit transmitters. You are able to dim incandescent lamps and halogen lighting from 20 to 250 Watt wirelessly with this receiver.

For 12 Volt halogen lighting in combination with a wire-wound (coil) transformer, the minimum wattage is 40 Watt. Dimmable LED and energy-saving lamps can be dimmed with this dimmer from 3 to 24 Watt. In order to successfully dim these various types of lighting, it is important to set the dimming range for the specific lamp. This way, you are assured that you can dim the lighting of your choice beautifully wirelessly.

After connecting the electrical wires, you then connect the two white wires to the existing single wall switch. This way, the function of the single-pole switch is retained. You can only connect these white wires to a single switch that is not part of a changeover or hotel switch. If it is a hotel switch, you must remove 1 of the 2 wall switches, so that you have 1 single wall switch left. You can then place a mini built-in transmitter behind the 2nd switch or replace this switch with a wireless wall switch.

You can only install this receiver behind a single wall switch, so not behind a dimmer or pulse switch. You can control the receiver with any KlikAanKlikUit transmitter with the automatic code system, such as the AYCT-102 and ICS-1000. Built-in mini dimmer for wireless dimming of all dimmable lamps (max. 250 Watt).

Can be operated with various KlikAanKlikUit transmitters.

Can easily be placed behind an existing single wall switch
Suitable for dimming all types of dimmable lamps (max. 250 Watt)
Original wall switch can still be used