Description Bambu Lab Support for PA / PET - Green - With Coil - 500G

The Bambu Lab Support for PA / PET is a revolutionary support material. It is specially developed for use with PA, PET and their carbon fiber reinforced composites. This green filament, with a diameter of 1.75mm and a net weight of 500g, offers the perfect solution for prints that require support, but must be ready for use immediately after printing. The material forms a weak bond with PAHT-CF and PET-CF. This makes it easy to remove by hand or tool without further post-processing. This saves you a lot of post-processing time. The spool, made of a PC+ABS material with a temperature resistance up to 90°C, has a diameter of 200mm and a height of 67mm. Before printing, it is recommended to dry the material for 8-12 hours at 80°C. During printing a nozzle temperature of 260-290°C is required, with a bed temperature of 80-100°C, supported by an engineering plate, a high temperature plate or a textured PEI plate. Optimal storage conditions are below 20% RH, sealed with a desiccant, to ensure quality.