Description Bambu Lab PVA - With Spool - 0.5KG
Bambu Lab PVA is a water-soluble support material for 3D printing. This filament provides reliable support for complex designs and overhangs. After printing, it dissolves easily in water. It works with various filaments and simplifies post-processing.
PVA penetrates deeply into intricate details. It provides support where conventional supports fall short, allowing you to print models that were previously impossible. The material creates a seamless bond with the print surface, resulting in smooth and precise contact surfaces.
The filament uses a high-quality formula. It dissolves easily and completely in water. Manual cleaning is no longer necessary. Warm water accelerates the dissolving process. For PLA prints, the water should not be warmer than 50°C.
The RFID chip contains all print settings. The AMS (Automatic Material System) reads these automatically. Loading and printing is straightforward, requiring no complicated settings. The filament must be thoroughly dried at 80°C for 12 hours before use.
Bamboo Lab PVA - With Spool - 0.5KG
SKU: BAMB2066
- Order before 4:00 PM = shipped today
- Free shipping from €99.95
- 14 days free returns
- Same-day pickup at our office in Leusden
Description Bambu Lab PVA - With Spool - 0.5KG
Bambu Lab PVA is a water-soluble support material for 3D printing. This filament provides reliable support for complex designs and overhangs. After printing, it dissolves easily in water. It works with various filaments and simplifies post-processing.
PVA penetrates deeply into intricate details. It provides support where conventional supports fall short, allowing you to print models that were previously impossible. The material creates a seamless bond with the print surface, resulting in smooth and precise contact surfaces.
The filament uses a high-quality formula. It dissolves easily and completely in water. Manual cleaning is no longer necessary. Warm water accelerates the dissolving process. For PLA prints, the water should not be warmer than 50°C.
The RFID chip contains all print settings. The AMS (Automatic Material System) reads these automatically. Loading and printing is straightforward, requiring no complicated settings. The filament must be thoroughly dried at 80°C for 12 hours before use.
