Description 4-Pin JST PH to JST SH Cable - STEMMA to QT / Qwiic - 200mm

This 200mm long 4-wire cable is ideal for makers working with STEMMA and Qwiic systems. This unique cable has a STEMMA QT / Sparkfun Qwiic JST SH connector on one end and a STEMMA JST PH connector on the other. With a small modification, such as filing off the center lug, the JST PH connector will also fit into a Grove connection.

The JST PH connectors have a pitch of 2mm, while the JST SH (also known as Qwiic) connectors have a pitch of 1mm. Both connectors have a firm click, but are still easy to plug in and out. This cable is ideal for use with PyPortal, PyBadge, PyGamer, and HalloWings, among others, or other devices that use a 4-pin JST PH connector for I2C.

Use this cable to easily connect sensors and drivers from one board to another. Please note that you need to pay attention to the voltage when using 3V-only Qwiic sensors with this cable.

You can use this cable to connect any Grove I2C sensor (3-5V) to an I2C host with STEMMA QT or Qwiic connectors (3V). You can also connect any STEMMA QT sensor (3-5V) to a Grove or STEMMA host (5V) board, and vice versa. Note: if you want to connect a Qwiic board (3V power only!) to a Grove or STEMMA host, make sure the power switch is set to 3V.